Can any one help with identifying where the thin 3 core wire goes to that branches of the the main passenger side headlight plug wiring loom ,
Any help would be greatly appreciated
Thanks , just had a look on the site and in the main loom diagram you can see where the cable is in the ref image but no indication to what it goes to or what part it feeds
You might want to check the General Vehicle Electronics manual - https://cdn.jack.sh/2014/08/05_I01-General-Vehicle-Electronics.pdf
See the diagram on page 50 - "System wiring diagram for front exterior lights with LED headlights and automatic headlight beam throw adjustment"
thanks for both sites very good info , could be for the height sensor which im not sure if this is a option on these cars if so would indicate why cable goes no where
Standard features vary by market...in the USA, the LED headlights are generally 'standard', and those do self-level. Some have headlight washers, so that wire might be in the bundle going in the headlight direction.