I have been successfully coding my 2015 i3 Rex to get rid of my seat-belt warning lights and warning chimes since I have owned for about two years. About half of my trips to the dealer for maintenance result in the need for me to re-code my vehicle to get things right. My last trip about three weeks ago left me with seat-belt warning lights and chimes that I cannot get rid of with coding anymore.
In the past I would go into E-Sys, go into the ACSM section and code the following values:
SeatBeltReminder_Fahrer
SeatBeltReminder_Beifahrer
SBR-Prewarning_Fahrer
SBR-Prewarning_Beifahrer
Now the ACSM2 section has the following: CAFD_000011AB_007_002_002 file which almost all section under 3001 marked as Gurtwarnung_X_Y_Z / "Trimmed function". The above values do not exist for me to change anymore.
I use:
ESYS 3.28.1
v.63.3_PSdZData_Lite
Anybody have any ideas?
In the past I would go into E-Sys, go into the ACSM section and code the following values:
SeatBeltReminder_Fahrer
SeatBeltReminder_Beifahrer
SBR-Prewarning_Fahrer
SBR-Prewarning_Beifahrer
Now the ACSM2 section has the following: CAFD_000011AB_007_002_002 file which almost all section under 3001 marked as Gurtwarnung_X_Y_Z / "Trimmed function". The above values do not exist for me to change anymore.
I use:
ESYS 3.28.1
v.63.3_PSdZData_Lite
Anybody have any ideas?
