1st time poster here, but I'm sort of at a loss for what I should do. About a week or so ago I coded my car via e-sys to enable TJA using an addon module. The coding went fine, and the TJA worked as intended. The other day, I decided to code my car to disable the freeway requirement and allow for higher speeds. When testing the coding, the TJA functionality still required me to use "the expressway."
I decided to revisit the coding over the weekend, in the meantime I used the BimmerCode app to recode some of the "essentials" (since it's quicker) - ie, folding mirrors when locking, door handle light up in reverse, etc...
Well, the next morning, I received 3 errors when I started my car:
Brake System. Drive Moderately
Cruise Control. Keep your distance
Front-end collision warning restricted
Pedestrian alert restricted
I used BimmerCode app to restore from backups. No change. I then went into esys to FA code from the TJA backup file that I saved prior to all of this. When I checked the codes, none of the changes I made were present. So it looks like everything is back to the original state....with the exception of the error codes.
I'm at a loss, other than removing the module to see if that helps. I'd like to learn and fix it myself, but I have no idea what steps to take next (other than just bringing it to the mechanic to fix)
Any advice is _greatly_ appreciated!