in teaching me to code my car. I have never done it and want to make sure I do it correctly. I have the cable, but still need a token I guess..? Then just to have someone show me how to get going is all I am looking for, after that I should be good but I simply just want to make sure I am the correc...

the installer that wrapped my car also applied a clear bra to the front and to the rear bumper to protect from scratches. I don't know what the product is but glad I did it to prevent scratches. If you find a local shop that provides a clear bra they can probably take care of the bumper

same width AND offset, shouldn't be any issue at all. same width but the offset is changed a little bit to bring them more flush. Offset doesn't affect weight, it just changes where the wheel sits in relation to the car. Now saying that, these wheels do weigh 1 more pound over stock (stock is 18 fr...

Good luck with clearances once you do get them installed...and, a wider tire will reduce your range: wider, more drag, and a typical tire you install will not likely have the same low rolling resistance as the OEM versions. same width as stock 5 front & 5.5 rear, where did you read I was getting bi...

Bumpers. Can't wait to see pictures when you have the wheels on the car. guess I forgot to update the forum. This week I received the wheels (finally), went to have them installed and ran into an issue... Apparently most BMW's are a bolt spacing of 120, but not the i3 (it's 112 fwiw)... So RSV is r...

nice, did you do it yourself of pay some one?

stumbledotcom wrote:Hint: a quick search revealed online vendors selling the part for much less than MSRP.

where did you purchase from?

I de-badged mine, then changed my mind. Quite expensive. https://lh6.googleusercontent.com/-13goeSMJp9g/VAJ0mmCNICI/AAAAAAAACek/eO9LzEP4OUw/w915-h686-no/IMG_20140830_084239.jpg apparently you don't want to pull on the badges too hard.... But I wonder with less weight if you are eeking out a for mor...

Denreltub wrote:Has anyone found a car cover they can recommend?

they need to make one with a charge port/flap

Thanks again to Jelloslug for posting the picture. Adjusted the lights this evening and everything was super simple. Backed into the garage, closed the door and left the car on. Marked where the top of the lights were with a couple pieces of tape. Popped the frunk, pulled up the velcro'd side panel...