tpaxadpom wrote:Thank you for your reply. We e-mailed the seller and he is shipping a replacement. The module is either not properly programmer or has hw issues. There were several errors including LIN bus related to that and he concluded the module is likely dead.
Well, I got my Quidzel module last week, and tpaxadpom did the coding on it last night. Three hours of troubleshooting, and it looks like another
dead module. It says TJA is available, but when I try to activate, it fails, and there are error codes indicating steering wheel wrong version, steering column switch cluster wrong version, and touch detection Missing LIN slave, just as he got when programming the other person's car in March.
Contacting Quidzel now.
Edit: Contacted Quidzel. Advice? "While the car is on, attempt to activate TJA until it throws the error, then while the error is still displayed on screen, unplug the module and plug it back in repeatedly."
I tried this. It did not work. I emailed saying so. He said to keep trying. I ended up having to unplug/replug the module 7 times in rapid succession before it triggered. In the process, the "expressway only disable" and speed limits were both reset to the defaults. (tpaxadpom had disabled "expressway only", and set the speed limits up to 45 MPH. But even with it working, with no 'full car coding' done since, it insisted on expressways, and when I was, it said "only up to 35 MPH".)
Does anyone know where in Bimmercode the ICM/3000/C_STA_Einschraenkung and QCalRel_v_Tacho_aktiv (mph and kmh) settings are? I can't seem to find them - yet others in the thread have said that Bimmercode can do those settings, even though it can't add 5AR to the whole car as needed to activate it in the first place.