Hi everyone!
The outside temp sensor started displaying -40 degrees.
I replaced the sensor but the problem remained.
There is 11.7 V on the wire.
If i jump the two leads the display says +50 degrees.
I have inspected the wiring and the connectors on each lead and all looks ok.
Any ideas?
The outside temp sensor started displaying -40 degrees.
I replaced the sensor but the problem remained.
There is 11.7 V on the wire.
If i jump the two leads the display says +50 degrees.
I have inspected the wiring and the connectors on each lead and all looks ok.
Any ideas?