We ran over something in the road without seeing it and it shredded the wiring to the leveling sensor (?) and to the parking brake actuator. I can solder the actuator wires back together (there is a repair kit available), but the terminal and wire to the leveling sensor were ripped away. Got a replacement connector & pinned replacement wires for the sensor, but need to know the wire colors for the three wires going into the connector so I get them soldered into the correct position.
This is the driver's rear fender well area, so if you can provide the colors and location of the 3 wires, or a pic, or an online info location, it would be greatly appreciated.