Recent content by KolorMeCarbon

Sorry I only just saw the question. the specs are in this post: http://www.mybmwi3.com/forum/viewtopic.php?f=12&p=47704#p47704

Mercedes-fitment are the ones to shop for. 5x112 PCD, 66.5CB, and find the lowest offset possible. ET40 on a 7.5J x 19" rim needs a 24mm spacer with 215 tyres to clear the front spring by 4mm (same if you're fitting i8 wheels). ET 32 offset will work with 15mm spacers. You'll need arch...

kc1 I'll have two front seats in pale grey cloth for sale soon. They're from a 4.5k-miles i3 and are in perfect condition. I'm swapping-in two carbon bucket seats.

Thanks for keeping the thread alive. I've been checking the RealOEM site and looking at some (non BMW) D.i.y. EV conversions, the cabling does seem to go direct to the battery from the socket. The car's sensors still monitor the LoC and communicate it back to the EVSE. I have another i3...

I’ve just bought the whole kit with ICOM. when it arrives, i’ll let you know what it can/cannot do.

chipping in with a question... I’m attempting to recalibrate the steering angle sensor because it’s sending wrong info to the yaw sensor and DCS module. My car has 7x18” wheels and is 20mm lowered. The car handles better than the DCS can predict when it should be crashing because it can achieve...

thanks alohart, that link is very useful. I did try replying same day you posted it, but now I’v revisited this thread, I notice mt reply didn’t ‘save’. My ‘project’ is to remove the large, unaerodynamic mirrors and replace with small cameras held in custom pods (motorcycle indicators). I’ve...

hi, did you find out how to remove the side mirrors? I’m looking for info on whether they can be replaced by cameras. Need to remove a mirror to trace the wires and see what can be blanked off to keep the mod looking ‘factory’. Thanks

A few weeks late to this thread, but my wide-tyred i3 BeV has cured the unintended drifting ( oversteer ) on fast, tight corners. i3s will wheel-spin with and without DSC on, but not in a straight line on a dry road. I’ve fitted 7.5J 18” rims for better grip, tyres are 215 45 18 with B rating...

Ironically my i3 does have a water ingress problem, in the carbon side sills. The tailgate has no leaks, the vinyl cover is about twice the diameter of the hole, it’s a water-tight seal. If water did get under the vinyl it would dissolve the adhesive and it’ll fall off but it’s remaining...

thanks for the suggestion. I vinyl wrapped the lower lamp units, they’re almost invisible on the black car, but still plenty of light intensity for reversing. No rewiring required.

I’ve been doing some measuring of i8 tyres (on the early-model 7j and 7.5j rims). With 25mm spacers, the i8 wheels will fit an i3. The front wheels are the tight fit, the coil springs only have 4mm clearance using a 190 tyre. I have aftermarket springs which are shorter but +4mm diameter. I’ll...

Has anyone heard any sloshing water sound coming from anywhere in their i3’s bodywork? I have a 2016 BeV, the only liquid that should be in the car is the front screen-wash bottle, the brake-fluid and possibly coolant around the battery. I can hear what sounds like several litres of water...

Did you have any success with the charger update? I’m hoping to upgrade my UK model BEV to add the DC fast-charge socket. it only has the single type 2 socket now. Having worked on other parts of the car, I noticed BMW seems to leave the wiring for component options in the car’s loom, but the...

Thanks for the replies. I found the lamp units in my UK- model tailgate panel are indicators that have white LED bulbs (they illuminate amber/orange). I’m going to tint the main part of the lower lights with dark-black tint for most of the lens, but use lighter tint for the ‘legality’ bits...