Won't DC charge but AC charging is fine.

BMW i3 Forum

Help Support BMW i3 Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rlbouah

Member
Joined
Jan 10, 2024
Messages
10
Hi guys, so my 2014 60ah rex developed a CCS(DC) charging fault over the weekend while visiting Scotland. Noticed the fault after a full charge with the factory granny charger at the place we were staying at. Charges fine on AC but will not charge at any CCS (DC) charging station. Says station error on the dash but I have tried 10 different public chargers. Also has that Drive train fault straight after I used the granny charger.Please check the images below and advise thanks.
 

Attachments

  • IMG_20240115_235208815.jpg
    IMG_20240115_235208815.jpg
    1.6 MB · Views: 1
  • Screenshot_20240115-225708.png
    Screenshot_20240115-225708.png
    53.3 KB · Views: 1
  • Screenshot_20240115-225558.png
    Screenshot_20240115-225558.png
    66.3 KB · Views: 1
  • Screenshot_20240115-225545.png
    Screenshot_20240115-225545.png
    64.8 KB · Views: 1
  • Screenshot_20240115-225519.png
    Screenshot_20240115-225519.png
    173 KB · Views: 1
  • Screenshot_20240115-225507.png
    Screenshot_20240115-225507.png
    53.1 KB · Views: 1
  • Screenshot_20240115-225350.png
    Screenshot_20240115-225350.png
    56.8 KB · Views: 1
  • Screenshot_20240115-225310.png
    Screenshot_20240115-225310.png
    67.5 KB · Views: 1
if you plug it into the AC charger (granny), can you lock the car so the little locking pin comes out and locks the charging handle in place? It should also release when you unlock the car. If it is not working, that would be the first thing to address as it is not really necessary for AC charging but absolutely necessary to engage DC charging.
 
Yes it locks fine with DC and AC chargers but with DC it gives a charging error I think it has to do with an isolation/insulation fault
 
Back
Top