BMW I3 Wheel Spacers

[i3rocco]

Hello everyone,

I would like to improve the stance of my I3. I came across these lightweight wheel spacers that seem pretty good quality.

https://wheelspacerstore.com/products/lightweight-wheel-spacers-bmw-i3-i3s-i4-i8-ix-ix3

What size should I be getting for a flush fitment? I'm will also lower the car with springs. Thanks!

 

[SSi3]

From what I recall in the past on here and on the FB group, people seemed to settle on 10mm in front and 15mm in the rear to get the right look. I think 15mm on the front makes the tires stick out a little too much.

Make sure you get longer lugs too, don't use the factory ones with spacers.

 

[i3rocco]

From what I recall in the past on here and on the FB group, people seemed to settle on 10mm in front and 15mm in the rear to get the right look. I think 15mm on the front makes the tires stick out a little too much.

Make sure you get longer lugs too, don't use the factory ones with spacers.

Thank you! I think I will go with 10mm front and 15mm rear then. This place has options for longer bolts which I will definitely get then,